A free daily laser puzzle: Fibs’ Laser Chase
A laser puzzle gives you a beam of light, a few mirrors and a target. The beam runs in straight lines, each mirror turns it by a right angle, and you set the mirrors so the beam reaches the target, around whatever stands in the way. It looks like a toy, and it is one, but every mirror you add doubles the ways they can stand, and only one way works.
Fibs’ Laser Chase is our free daily laser puzzle. The Kid shines two laser pointers into the living room, seen from above, and you turn his little mirrors so one red dot lands on Fibs the cat and one on Rex the dog.
What a laser puzzle is
Every laser puzzle runs on one rule of light: a beam leaves a mirror at the same angle it arrived. Puzzle makers keep only the tidiest case. Stand a mirror at 45 degrees across a square, and a beam that meets it turns by exactly 90 degrees.
- Leaning right.
- Leaning left.
Whichever way a beam arrives, one way of standing turns it left and the other turns it right. So on a grid, a mirror is a yes-or-no question, and a laser puzzle is a chain of them. Turn a mirror the beam never reaches and nothing changes, so you only ever need to think about the mirrors in the beam’s path.
Game makers have come back to this idea for about fifty years, from the board game Black Box in 1977 to Deflektor on home computers and Khet with real lasers. Our post on laser mirror puzzles tells that story, and names three more you can play free in a browser.
How Fibs’ Laser Chase works
- Aim first. The lasers stay off while you turn the mirrors. Tap a mirror to turn it: each one stands one of two ways, and turning is free.
- Shine. Both lasers switch on and run in from the left wall. Each beam turns a right angle at every mirror it meets, and furniture and the walls stop it.
- One dot each. One red dot must land on Fibs the cat and one on Rex the dog. Either laser can serve either of them.
- 3 shots a day. A miss shows where both beams went, so every shot teaches you something.
A new room comes every day at midnight, your time, the same one for everyone. It’s free, in any browser, and you don’t need an account.
A worked example: two lasers, four mirrors
Here’s a small room drawn for this page, not from any daily. Two lasers shine in from the left wall, in the second row and the fourth. There are four mirrors, a plant and a table. Fibs sits at the right end of the fourth row, and Rex is in the top row. As the Kid left the mirrors, one beam runs into the top wall and the other into the plant.
- As it starts.
- Backward from each pet.
- A dot each.
You could try mirrors at random, but every wrong shot costs you. Look at the pets instead.
- Start at the pets, not the lasers. A beam can only reach Fibs along her row or her column. Her column has no mirrors, and the only mirror in her row is the one in the middle, with nothing in between. So that middle mirror has to send a beam right, to her.
- Do the same for Rex. Nothing in his row can reach him, and the first mirror down his column is in the bottom row, on the left. So it has to send a beam up. That beam can only arrive along the bottom row from the right, off the other bottom mirror, and that one can only be fed from straight above: by the middle mirror again.
- Find the mirror both beams need. The middle mirror has two jobs. It must send one beam right, to Fibs, and one beam down, toward Rex. Leaning left, like a backslash, does both at once: the lower laser hits it and turns down, and a beam coming down from above turns right. Leaning the other way sends the lower laser up, and nothing else can reach the mirror from the right to be turned down.
- Fix one beam, then check the other. A beam coming down onto the middle mirror can only come from the mirror above it, so that one leans left too, and the upper laser turns down there and on to Fibs. Now follow the lower laser with those mirrors settled: down off the middle mirror, left off the bottom one, up off the bottom-left one, and onto Rex.
Two dots, one shot, and no guessing. We never tried a setting: every step asked which squares can see a pet, and which mirror has to suit both beams. A daily room has more mirrors and more furniture, but the same questions do most of the work.
Tips for solving laser puzzles
- Trace backward from each pet. Only the squares in a pet’s row and column, with nothing in between, can send it a beam. Often just one mirror can. Settle that one first, then ask what feeds it.
- Mirrors only talk along lines. A mirror can only feed another in the same row or column, with nothing between them. Most pairs of mirrors can’t reach each other at all.
- Look for the shared mirror. Both beams use the same mirrors, and at least one mirror sits on both of them. It has to suit both beams at once, so one of its two ways usually breaks a beam, and that tells you how it stands.
- Fix one beam, then check the other. Settle the mirrors one beam needs, then follow the other laser through them. A way that works for one beam can break the other.
- Some mirrors are spare. A mirror that neither beam needs can stand either way. Don’t let it pull your route toward it.
- Turn freely, shine with care. Turning a mirror costs nothing; only a shot counts. When a shot misses, both whole beams stay on show. Read where each one went before you turn anything.
For the curious: every bounce swaps a beam between running across the room and running up or down it. Both lasers start out running across, so a beam that has bounced an even number of times is running across again, and an odd number means it’s running up or down. If a pet can only be reached along its column, its beam needs an odd number of bounces.
Why every room has exactly one answer
Each room is made ahead by a program and handed out by date, so everyone gets the same one. It keeps a room only if exactly one pair of beams lands a dot on each pet, with at least one mirror on both beams. In our tests, a separate counter tries every way the mirrors can stand, one by one, to check the maker’s work. How we make puzzles with exactly one answer explains how the family’s dailies are checked.
So you can always reach the answer by reasoning, as in the example above, and you never need luck. How to play has every rule.
Sharing without spoilers
Share sends your room’s number, your time and your shots, never how the mirrors stand, with a link a friend can use to try to beat your time. Fibs’ Laser Chase also has its own board for your group of friends and for the whole world.
More daily puzzles from the Fibbersons
Fibs’ Laser Chase is one of seven free dailies:
- Lie of Sight: a room seen from above, a family who each say what they saw, and one of them lying.
- Rex’s Fetch: lead Rex through every square of the yard, then to the ball. See our guide to path puzzles.
- Lacey’s Web: a number-and-connection puzzle on a spider’s web, in the family of Hashi bridges puzzles. See our Lacey’s Web guide.
- Grandma’s Knitting: knit what the numbers say, and a picture appears. See our guide to nonograms.
- The Kid’s Treasure Map: each number counts the treasure around it, like Minesweeper with no guessing. See our guide to minesweeper puzzles.
- Dusty’s Rounds: give the robot vacuum a few moves to repeat. See our guide to programming puzzles.
For more logic like this from other makers, with no numbers to add up, see games like Sudoku, but not numbers.
Questions people ask
Is Fibs’ Laser Chase free?
Yes. A new room comes every day at midnight, your time, the same one for everyone. It’s free in your browser, on a phone or a computer, and needs no account.
How do laser mirror puzzles work?
A beam runs in straight lines and leaves a mirror at the same angle it arrived. Set at 45 degrees on a grid, a mirror turns the beam by exactly 90 degrees, so each mirror is a choice between two turns. You set them all so the beam reaches its target.
What is the quickest way to solve a laser puzzle?
Start at the target and work backward. Only the squares in its row and column, with nothing in between, can send it a beam, and often just one mirror can. Then ask what feeds that mirror.
Can either laser reach either pet?
Yes. One red dot must land on Fibs and one on Rex, and it doesn’t matter which laser lands which.
What happens when I miss?
You use one of the day’s 3 shots, and both whole beams stay on show, so you can see where each one went. Turning mirrors is free. Only a shot counts.
Does every room have one answer?
Yes. Exactly one pair of beams lands a dot on each pet. A mirror that neither beam needs can stand either way.
Ready for today’s room?
A new room every day. Free, with no sign-up.